- 1x DRAG X PRO Device
- 1x TPP X Pod (5.5ml)
- 1x TPP-DM3, 0.15ohm
- 1x TPP-DM2, 0.2ohm
- 1x Type-C Cable
- 1x User Manual
- Battery: External 18650 or 21700 single battery (Note: Batteries are not included. Please click here for batteries.)
- Capacity: 5.5ml
- Output: 5-100W
- Output voltage: 0-8.5V
- Mode: VW/ TC/ RBA/ smart modes
- Resistance ranges: 0.1-3ohm
- Charging: Type-C, 5V/2.5A
- Resistance: TPP-DM3, 0.15ohm mesh coil, TPP-DM2, 0.2ohm mesh coil.
- This kit is compatible with all TPP Coils. Please click here to find extra coils for the Drag X Pro.
- Support single 18650/21700 battery, 5-100W output (Original Drag X limited to 80W)
- The Drag X Pro now comes with an auto-draw feature! This was previously only limited to the Drag S mod.
- Now using VooPoo’s latest chip, the Gene Fan 3.0! And with the new chip, that means Drag X Pro kit have boost modes for stabilised output up to 8.5V, improving performance by 20%!
- The ALL NEW TPP X Pod now has a concealed side-fill, a removable 810 drip tip, and has a stainless steel chamber that houses the coil. Whereas the previous TPP and PnP pods have bottom fill.
- Innovative 360° infinite airflow system
- Provide VV/VW/SMART/RBA/TC mode
- Type-C 5V/2.5A fast charging port
- We recommend using an external battery charger to reduce the risk of breaking the charging port (Available here)
- Lastly, the airflow control ring is now all uniform and smooth, with no knob sticking out that can catch in our pockets.